PSE-SW5BA5D4

Features

• Standards IEEE802.3/IEEE802.3u standards/IEEE802.3ab (10
• base-T/100base-TX/1000base-T)
• Ports 5 ports with PoE (4 PSE & 1 PD), support auto-crossover &
• auto-polarity
• Transmission speed 1000Mbps (1000base-T).100 Mbps (100base-TX), 10 Mbps(10base-T)
• Auto-negotiation
• Switch technology store-and-forward
• Protocols CSMA/CD
• Flow control IEEE802.3x (full-duplex), back pressure (half-duplex)
• Data transmission rate 1488000pps for1000base-T, 148800pps for 100base-T, 14880pps for 10base-T
• Address table 2K MAC address table, self-learning
• Connect RJ-45
• PoE port Port 1-4, PSE auto power management
• Pin assignment:
• *A+B mode: data pair A plusV-(1,2),data pair B plusV+(3,6),
• data pair C plusV+(4,5), & data pair D plus V-(7,8)
• Port 5, 4 pairs PD
• Maximum PoE power Port 1-4: IEEE802.3af – 16.8W
• IEEE802.3at – 35W
• IEEE802.3bt class 8 – 100W
• (Port1/port2 use one 120W power, port3/port4 use another one 120W power, total power is 240W)
• Port 5: 71W (802.3bt class 8)
• PSE disconnect mode DC disconnect
• PoE auto detection IEEE802.3af , IEEE802.3at (2 event classification) &
• IEEE802.3bt(multi-event classification)
• PoE protection Over-temperature, over-current, over/under voltage
• LEDs *Link/Activity (Green ON/ Green Blinking @1000Mbps, Yellow/Yellow Blinking @10M/100Mbps)
• *PoE (Yellow) port 1-4 ON – PD detect, deliver power via 4 data ports Blinking-PD detect, deliver power via 2 data ports
• Port 5 ON –power via PoE PSE
• *POWER Green-normal
• Power input AC90V~AC264V or port 5 (UPLINK) from network switch or midspan
• Power efficiency 82% Min. at 90V ~ 264V AC input @F.L
• Power consumption less than 18W at 90V ~264V AC input when without PD loading
• Operating temperature -20?~ +70?
• Operation humidity 90% relative humidity, non-condensing
• Storage temperature -40?~+85?
• Dimension 44.45mm(H)x 290mm(W)x190mm(D) 19” rack mountable