IES-5408F Series

IES-5408F Series

4 100M FX +8 10/100BaseTX L2+ Industrial Managed Ethernet Switch w/ Enhanced G.8032 Ring

 

Overview

Lantech IES-5408F is a high performance L2+ (Gigabit uplink) switch with 8 10/100BaseTX + 4 100M FX which provides L2 wire speed and advanced security function for network aggregation deployment. It delivers ITU G.8032 enhanced ring recovery less than 20ms in single ring while also supports train ring, enhanced mode, multiple VLAN model with easy configuration. The comprehensive QoS, QoS by VLAN, advanced security including INGRESS/EGRESS ACL L2/L3, TACACS+*, SSH/SSL, Mac based DHCP server, DHCP Option 82, DHCP server, IGMPv1/v2/v3/router port, QinQ** are supported and also required in large network. It also supports Cisco Discovery Protocol (CDP) for Ciscoworks to detect the switch info and show on L2 map topology.

Miss-wiring avoidance, Repowered auto ring restore, Loop protection
The IES-5408F also embedded several features for stronger and reliable network protection in an easy and intuitive way. When the pre-set ring configuration failed or looped by miss-wiring, Lantech IES-5408F is able to alert with the LED indicator and disable ring automatically. Repowered auto ring restore function (node failure protection) ensures the switches in a ring to survive after power breakout is back. The status can be shown in NMS when each switch is back. Loop protection is also available to prevent the generation of broadcast storm when a dumb switch is inserted in a closed loop connection.

Enhanced G.8032 ring, 16 MSTI MSTP; Optional MRP ring
Lantech IES-5408F features enhanced G.8032 ring which can be self-healed in less than 20ms for single ring topology protection covering Multicast packets. It also supports various ring topologies that covers double ring, multi-chain (under enhanced ring), train ring, basic ring, multiple-VLAN ring and auto-ring by easy setup than others The innovative auto-Ring configurator (auto mode) can calculate owner and neighbor in one step. It supports MSTP that allows each spanning tree for each VLAN for redundant links with 16 MSTI.

Editable configuration file
The configuration file of Lantech IES-5408F can be exported and edited with word processor for the other switches configuration with ease. The factory reset button can restore the setting back to factory default and built-in watchdog design can automatically reboot the switch when CPU is found dead.

Event log & message; 2DI / 2DO
In case of event, the IES-5408F is able to send an email & SMS text message to pre-defined addresses as well as SNMP Traps out immediately. It provides 2DI and 2DO. When disconnection of the specific port was detected; DO will activate the signal LED to alarm. DI can integrate the sensors for events and DO will trigger the alarm while sending alert information to IP network with email and traps.

Wide range dual DC powered input with galvanic isolation; Relay contact alarm, High ESD protection
The Lantech IES-5408F is designed with dual power supply at 18~56VDC. Featured with relay contact alarm function, the IES-5408F is able to connect with alarm system in case of power failure. The IES-5408F also provides ±2000V EFT/SURGE and ±4000 VDC (Contact) / ±8000 VDC (Air) Ethernet ESD protection, which can reduce unstable situation caused by power line and Ethernet.

The -E model can be used in extreme environments with an operating temperature range of -40°C to 75°C.

Features

  • 8 10/100BaseTX + 4 100M FX (Total 12 Ports Switch)
  • Back-plane (Switching Fabric): 2.4Gbps
  • 16K MAC address table
  • 10KB Jumbo frame
  • User friendly UI, auto topology drawing, topology demo, complete CLI for professional setting
  • Enhanced G.8032 Ring protection in 20ms < 256 switches
  • DHCP server / client / DHCP Option 82 relay / DHCP Option 82 server ;Port based
  • DHCP server; DHCP Option 66; IPv6 address resolution for DHCP server**
  • Mac based DHCP server to assign IP address that includes dumb switches in DHCP network
  • Relay alarm output system events
  • Repowered auto ring restore
  • Ensure the switches in a ring to survive after power breakout is back
  • The status can be shown in NMS when each switch is back
  • System Event Log, SMTP Email alert, SMS mobile (text) and SNMP Trap for alarm support; 32 RMON counters
  • Supports 2DI / 2DO (Digital Input/Digital Output)

Ordering Information

All model packages include M12 caps and wall mount bracket. All standard models are non-coating, optional coating models are available with –C model name.

Part NumberArticle NumberDescription
IES-5408F-SC-MM-2KM8350-5414 100M-SC-MM 2KM + 8 10/100Base TX L2+ Industrial Managed Ethernet Switch; -20°C to 60°C
IES-5408F-SC-MM-5KM8350-5424 100M-SC-MM 5KM + 8 10/100BaseTX L2+ Industrial Managed Ethernet Switch; -20°C to 60°C
IES-5408F-SC-SM-30KM8350-5434 100M-SC-SM 30KM + 8 10/100BaseTX L2+ Industrial Managed Ethernet Switch; -20°C to 60°C
IES-5408F-SC-MM-2KM-E8350-5444 100M-SC-MM 2KM + 8 10/100BaseTX L2+ Industrial Managed Ethernet Switch; -40°C to 75°C
IES-5408F-SC-MM-5KM-E8350-5454 100M-SC-MM 5KM + 8 10/100BaseTX L2+ Industrial Managed Ethernet Switch; -40°C to 75°C
IES-5408F-SC-SM-30KM-E 8350-5464 100M-SC-SM 30KM + 8 10/100BaseTX L2+ Industrial Managed Ethernet Switch; -40°C to 75°C
IES-5408F-ST-MM-2KM8350-5474 100M-ST-MM 2KM + 8 10/100BaseTX L2+ Industrial Managed Ethernet Switch; -20°C to 60°C
IES-5408F-ST-MM-2KM-E8350-5484 100M-ST-MM 2KM + 8 10/100BaseTX L2+ Industrial Managed Ethernet Switch; -40°C to 75°C

OPTIONAL ACCESSORIES – Connector / Cable

Part NumberDescription
MDR-40 Series40W Single Output Industrial Din Rail Power; 85-264VAC / 120-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 4% per degree from 60°C ~ 70°C)
MDR-20 Series20W Single Output Industrial Din Rail Power; 85-264VAC / 120-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)

Downloads

Manual

Datasheet