Lantech IPES 3416DSFP Series

IPES 3416DSFP Series

16 x 10/100BaseTX + 4 Dual Speed SFP L2+ PoE at/af Industrial Managed Ethernet Switch w/ Enhanced G.8032 Ring

 

Overview

Lantech IPES-3416DSFP is a high performance L2+ (Gigabit uplink) switch with 16 x 10/100BaseTX + 4 100/1000M SFP w/16 PoE 802.3af/at Injectors which provides L2 wire speed and advanced security function for network aggregation deployment. It delivers ITU G.8032 enhanced ring recovery less than 20ms in single ring while also supports train ring, enhanced mode, multiple VLAN model with easy configuration. The comprehensive QoS, QoS by VLAN, advanced security including INGRESS/EGRESS ACL L2/L3, TACACS+*, SSH/SSL, Mac based DHCP server, DHCP Option 82, DHCP server, IGMPv1/v2/v3/router port, QinQ** are supported and also required in large network. It also supports Cisco Discovery Protocol (CDP) for Ciscoworks to detect the switch info and show on L2 map topology.

Up to 16 PoE at/af ports w/advanced PoE management
Compliant with 802.3af/at standard, the Lantech IPES-3416DSFP is able to feed each PoE port up to 30 Watts providing the connected PD devices. Lantech IPES-3416DSFP supports advanced PoE management including PoE detection and scheduling. PoE detection can detect if the connected PD hang then restart the PD; PoE scheduling is to allow pre-set power feeding schedule upon routine time table. Each PoE ports can be Enabled/disabled, get the voltage, current, Watt, and temperature info displayed on WebUI.

Enhanced G.8032 ring, 16 MSTI MSTP; Optional MRP ring
Lantech IPES-3416DSFP features enhanced G.8032 ring which can be self-healed in less than 20ms for single ring topology protection covering Multicast packets. It also supports various ring topologIPES that covers double ring, multi-chain (under enhanced ring), train ring, basic ring, multiple-VLAN ring and auto-ring by easy setup than others. The innovative auto-Ring configurator (auto mode) can calculate owner and neighbor in one step. It supports MSTP that allows each spanning tree for each VLAN for redundant links with 16 MSTI.

Event log & message; 2DI / 2DO
In case of event, the IPES-3416DSFP is able to send an email & SMS** text message to pre-defined addresses as well as SNMP Traps out immediately. It provides 2DI and 2DO. When disconnection of the specific port was detected; DO will activate the signal LED to alarm. DI can integrate the sensors for events and DO will trigger the alarm while sending alert information to IP network with email and traps.

Wide range dual DC powered input with 48V model Relay contact alarm, High ESD protection
The Lantech IPES-3416DSFP is designed with dual power supply at 48VDC. Featured with relay contact alarm function, the IPES-3416DSFP is able to connect with alarm system in case of power failure. The IPES-3416DSFP also provides ±2000V EFT/SURGE and ±4000 VDC (Contact) / ±8000 VDC (Air) Ethernet ESD protection, which can reduce unstable situation caused by power line and Ethernet.

Industrial hardened design for extended temperature operation
Lantech IPES-3416DSFP features high reliability and robustness coping with extensive EMI/RFI phenomenon, environmental vibration and shocks usually found in factory, substation, steel automation, aviation, mining and process control. It is the best solution for Automation, transportation, surveillance, Wireless backhaul, Semi-conductor factory and assembly lines.
The -E model can be used in extreme environments with an operating temperature range of -40°C to 75°.

Features

  • 16 x 10/100BaseTX + 4 100/1000M SFP w/16 PoE 802.3af/at Injectors (Total 20 Ports Switch)
  • Embedded 16 PoE Injectors IEEE802.3af/at function to feed power up to 30W per port for active operation; PoE budget 240W
  • PoE management including PoE detection and scheduling for PD (power devices)
  • Back-plane (Switching Fabric): 11.2Gbps
  • 16K MAC address table
  • DDM to support SFP diagnostic function***
  • 10KB Jumbo frame
  • Support various ring/chain topologies, including train ring, enhanced ring, basic ring, auto ring & multiple VLAN ring
  • Enhanced G.8032 ring configuration with ease
  • Auto ring configuration(auto mode) for single ring
  • Supports IEEE 802.1p Class of Service, per port provides 8 priority queues Port base, Tag Base and Type of Service Priority
  • IEEE 802.1d STP, IEEE 802.1w RSTP,802.1s MSTP VLAN redundancy with 16 MSTI
  • 4K 802.1Q VLAN, Port based VLAN, GVRP**, QinQ**, QoS QinQ**
  • Relay alarm output system events
  • Repowered auto ring restore
  • System Event Log, SMTP Email alert, SMS** mobile (text) and SNMP Trap for alarm support; 32 RMON counters
  • Supports 2DI / 2DO (Digital Input/Digital Output)

Ordering Information

Part NumberArticle numberDescription
IPES-3416DSFP-48V8350-79616 x 10/100BaseTX PoE at/af up to 30W + 4 100/1000M SFP L2+ Industrial PoE Managed Ethernet Switch; -20°C to 60°C; 44~56VDC power input
IPES-3416DSFP-48V-E8350-79716 x 10/100BaseTX PoE at/af up to 30W + 4 100/1000M SFP L2+ Industrial PoE Managed Ethernet Switch; -40°C to 75°C; 44~56VDC power input
IPES-3416DSFP-48V-M8350-79816 x 10/100BaseTX PoE at/af up to 30W + 4 100/1000M SFP L2+ Industrial PoE Managed Ethernet Switch; -20°C to 60°C; Environmental monitoring; 44~56VDC power input
IPES-3416DSFP-48V-M-E8350-79916 x 10/100BaseTX PoE at/af up to 30W + 4 100/1000M SFP L2+ Industrial PoE Managed Ethernet Switch; -40°C to 75°C; Environmental monitoring; 44~56VDC power input

OPTIONAL ACCESSORIES – DIN Rail Power

Part NumberDescription
NDR-480 Series480W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
NDR-240 Series240W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
NDR-120 Series120W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C; For 115VAC, please refer to derating curve on NDR-120 Series datasheet)
NDR-75 Series75W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C; For 115VAC, please refer to derating curve on NDR-120 Series datasheet)

OPTIONAL ACCESSORIES – Mini GBIC (SFP)

Article NumberDescription
8330-060100Base FX 2KM, Multi-mode, LC Transceiver
8330-061100Base LX 30KM, Single-mode, LC Transceiver
8330-065100Base FX 5KM, Multi-mode, LC Transceiver
8330-068125Mbps BiDi SFP 20KM (WDM 1550) Transceiver
8330-069125Mbps BiDi SFP 20KM (WDM 1310) Transceiver
8330-071125Mbps BiDi SFP 2KM (WDM 1310) Transceiver
8330-072 125Mbps BiDi SFP 2KM (WDM 1550) Transceiver
8330-080125Mbps BiDi SFP 40KM (WDM 1310) Transceiver
8330-081125Mbps BiDi SFP 60KM (WDM 1310) Transceiver
8330-082 125Mbps BiDi SFP 40KM (WDM 1550) Transceiver
8330-083125Mbps BiDi SFP 60KM (WDM 1550) Transceiver
8330-084125Mbps BiDi SFP 80KM (WDM 1310) Transceiver
8330-085125Mbps BiDi SFP 80KM (WDM 1550) Transceiver
8330-198125Mbps BiDi SFP 60KM (WDM 1310) Transceiver
8330-162XMINI GBIC 1000SX (LC/0.5km) Transceiver
8330-163XMINI GBIC 1000SX2 (LC/2km) Transceiver
8340-0591MINI GBIC 1000LHX (LC/40km) Transceiver
8330-165XMINI GBIC 1000LX (LC/10km) Transceiver
8330-166MINI GBIC 1000XD (LC/50km) Transceiver
8330-167MINI GBIC 1000ZX (LC/80km) Transceiver
8330-168MINI GBIC 1000T (100m) Transceiver
8330-169MINI GBIC 1000XD (LC/60km) Transceiver
8330-170MINI GBIC 1000EZX (120km) Transceiver
8330-180LTSFP-1000BX-40KM Transceiver (WDM 1310)
8330-181LTSFP-1000BX-60KM Transceiver (WDM 1310)
8330-182LTSFP-1000BX-40KM Transceiver (WDM 1550)
8330-183LTSFP-1000BX-60KM Transceiver (WDM 1550)
8330-184LTSFP-1000BX-80KM Transceiver (WDM 1490)
8330-185LTSFP-1000BX-80KM Transceiver (WDM 1550)
8330-186LTSFP-1000BX-20KM Transceiver (WDM 1310)
8330-187LTSFP-1000BX-20KM Transceiver (WDM 1550)
8330-188LTSFP-1000BX-10KM Transceiver (WDM 1310)
8330-189LTSFP-1000BX-10KM Transceiver (WDM 1550)
8330-191Dual Speed SFP 100M/1000M-LX 10KM Transceiver
8330-1951.25Gbps BiDi SFP 2KM Transceiver (WDM 1310)
8330-1961.25Gbps BiDi SFP 2KM Transceiver (WDM 1550)
8330-1971.25Gbps BiDi SFP 0.5KM Transceiver (WDM 1310)

OPTIONAL ACCESSORIES – Wall Mount Bracket

Article NumberDescription
MBAK19003Wall mount bracket for 74(W) x 105 (D) x 152 (H) mm Industrial switches

Downloads

Manual

Datasheet