In-Line Joiner Connectors

In-Line Joiner Connectors

Jointing Inline Connector



Monoband-Train Antenna with certification / approval according to train standard EN 50155 for mounting on trains and vehicles.


  • Cable connector for field assembly Class FAfor 8 wire cables
  • To connect / extend / repair / relocate copper data cables up to Cat.7A
  • Compliance to Class FAup to 1000 MHz according to ISO/IEC 11801 Ed.2.2:2011-06 in connection with Cat.7Acopper cables *1
  • GHMT certified to ISO/IEC 11801 Ed.2.2:2011-06 and IEC 61156-5 Ed.2.1:2012-12
  • Suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT
  • Compact design: diameter 16.8 mm x length 64 mm
  • IP67 protected housing in combination with IP67 appropriate cables *2
  • Refined zinc die-cast housing
  • Easy and fast assembly without special tools
  • Shield connection and strain relief integrated
  • Easy connection of data cables AWG 26/1 to 22/1 (solid wire) and AWG 26/7 to 22/7 (stranded wire) to insulation displacement connectors (IDC)
  • Solid copper wire diameter 0.4 to 0.64 mm
  • Stranded copper wire diameter 0.48 to 0.76 mm
  • Conductor diameter up to 1.6 mm
  • Suitable for cables with an overall diameter of 5.0 to 9.7 mm *2
  • Fully shielded version according to DIN EN 50173-1*1FA(with cable lengths of 20 m and above on the left and right side of the cable connector)
    *2 IPX7 (when combined with cables suitable for IP67 and a cable jacket diameter of 6.2 mm to 9.7 mm)

Ordering Information

Part NumberDescription
130863-02-E connect / extend / repair /relocate copper data cables up to Cat7