Lantech IES-5408T-X

IES-5408T-X

8 10/100BaseTX + 4 10/100/1000BaseT X-coded L2+ EN50155 Managed Ethernet Switch w/ enhanced G.8032 Ring

 

Overview

Lantech IES-5408T (IP67/IP54) is a high performance L2+ (Gigabit uplink) switch with 8 10/100BaseTX(D-coded) + 4 10/100/1000BaseT(X-coded) M12 provides L2 wire speed and advanced security function for network aggregation deployment. It delivers ITU G.8032 enhanced ring recovery less than 20ms in single ring while also supports train ring, enhanced mode, multiple VLAN mode with easy configuration. The comprehensive QoS, QoS by VLAN, advanced security including INGRESS/EGRESS ACL L2/L3, TACACS+*, SSH/SSL, Mac based DHCP server, DHCP Option 82, DHCP server, IGMPv1/v2/v3/router port, QinQ** are supported and also required in large network. It also supports Cisco Discovery Protocol (CDP) for Ciscoworks to detect the switch info and show on L2 map topology.

Various dual input voltage selection of 12V/72V/110V
Lantech IES-5408T (IP67/IP54) is designed with various selection of dual input power voltage for 12V/72V/110V. 12V model can accept 9V~60VDC dual input power; 72V model for 50.4V~90VDC dual input range and 110V model for 43V~137.5V. The unique WV model can allow 16.8V~137.5V dual input range. Featured with relay contact alarm function, the IES-5408T (IP67/IP54) is able to connect with alarm system in case of power failure or port disconnection events.

DHCP option 82 & Port based, Mac based DHCP, Option66, IPv6 DHCP server**
DHCP server can assign dedicated IP address by MAC or by port (Port based for single switch) , it also can assign IP address by port for multiple switches with single DHCP option82 server. DHCP Option66 server can offer IP address of TFTP server to DHCP client for VOIP application. Optional IPv6 address resolution for DHCP service can be supported.

Enhanced G.8032 ring; 16 MSTI MSTP; Optional MRP ring
Lantech IES-5408T (IP67/IP54) features enhanced G.8032 ring which can be self-healed in less than 20ms for single ring topology protection covering Multicast packets. It also supports various ring topologies that covers double ring, multi-chain (under enhanced ring), train ring, basic ring, multiple-VLAN ring and auto-ring by easy setup than others. The innovative auto-Ring configurator (auto mode) can calculate owner and neighbor in one step. It supports MSTP that allows each spanning tree for each VLAN for redundant links with 16 MSTI.

Optional MRP (Media Redundancy Protocol) can be supported for industrial automation networks.

IGMPv3, GMRP**, router port, static multicast forwarding and multicast Ring protection
The unique multicast protection under enhanced G.8032 ring can offer immediate self-recovery instead of waiting for IGMP table timeout. It also supports IGMPv3, GMRP**, router port and static multicast forwarding binding by ports for video surveillance application.

Editable configuration file
Optional N key auto backup, Exported text file
The configuration file of Lantech IES-5408T (IP67/IP54) can be exported in text file so that it can be edited and configured back to switch with ease for mass deployment. The optional N-key configurator offers firmware upgrade, auto/editable configuration back up and restoration without computer by adjusting the DIP switch.

Event log & message; 1 DI + 1 DO
In case of event, the IES-5408T (IP67/IP54) is able to send an email & SMS** text message to pre-defined addresses as well as SNMP Traps out immediately. It provides 1DI and 1DO. When disconnection of the specific port was detected; DO will activate the signal LED to alarm. DI can integrate the sensors for events and DO will trigger the alarm while sending alert information to IP network with email and traps.

Features

  • 8 10/100BaseTX(D-coded) + 4 10/100/1000BaseT(X-coded) EN50155 IP67/IP54 M12
  • Managed Ethernet Switch (Total 12 Ports Switch)
  • EN45545-2 Fire & Smoke, EN50155 and EN61373 shock/vibration verification
  • N-key** configurator for firmware upgrade, auto/editable configuration back up and restoration
  • Back-plane (Switching Fabric): 9.6Gbps
  • 16K MAC address table
  • 10KB Jumbo frame
  • Enhanced G.8032 Ring protection in 20ms for single ring
  • Supports IEEE 802.1p Class of Service, per port provides 8 priority queues Port base, Tag Base and Type of Service Priority
  • IEEE 802.1d STP, IEEE 802.1w RSTP,802.1s MSTP VLAN redundancy with 16 MSTI
  • Supports IEEE 802.1ab LLDP, Cisco CDP; LLDP info can be viewed via Web/ Console
  • DHCP server / client / DHCP Option 82 relay / DHCP
  • Option 82 server; Port based DHCP server; DHCP Option 66; IPv6 address resolution for DHCP server**
  • Mac based DHCP server to assign IP address that includes dumb switches in DHCP network
  • Bandwidth Control
  • Ingress packet filter and egress rate limit
  • Broadcast/multicast packet filter control
  • Relay alarm output system events
  • Repowered auto ring restore

Ordering Information

All model packages include M12 caps and wall mount bracket. All standard models are non-coating, optional coating models are available with –C model name, optional bypass models are available with –B model names.

Part NumberArticle NumberDescription
IES-5408T-X-67-12V8360-7158 10/100BaseTX + 4 GigaT EN50155 M12 IP67 L2+ Managed Ethernet Switch; -40°C to 75°C; dual 9~56VDC
IES-5408T-X-54-12V8360-71518 10/100BaseTX + 4 GigaT EN50155 M12 IP54 L2+ Managed Ethernet Switch; -40°C to 75°C; dual 9~56VDC
IES-5408T-X-67-72V8360-7188 10/100BaseTX + 4 GigaT EN50155 M12 IP67 L2+ Managed Ethernet Switch; -40°C to 60°C; dual 50.4~90VDC
IES-5408T-X-54-72V8360-71818 10/100BaseTX + 4 GigaT EN50155 M12 IP54 L2+ Managed Ethernet Switch; -40°C to 60°C; dual 50.4~90VDC
IES-5408T-X-67-110V8360-7538 10/100BaseTX + 4 GigaT EN50155 M12 IP67 L2+ Managed Ethernet Switch; -40°C to 60°C; dual 43~137.5VDC
IES-5408T-X-54-110V8360-75328 10/100BaseTX + 4 GigaT EN50155 M12 IP54 L2+ Managed Ethernet Switch; -40°C to 60°C; dual 43~137.5VDC
IES-5408T-X-67-WV8360-7198 10/100BaseTX + 4 GigaT EN50155 M12 IP67 L2+ Managed Ethernet Switch; -40°C to 60°C; dual 16.8~137.5VDC
IES-5408T-X-54-WV8360-71918 10/100BaseTX + 4 GigaT EN50155 M12 IP54 L2+ Managed Ethernet Switch; -40°C to 60°C; dual 16.8~137.5VDC
N-key Configurator8850-100RJ45 connector dongle for firmware upgrade, auto/editable configuration backup and restoration; -20°C to 60°

OPTIONAL ACCESSORIES – Connector / Cable

Part NUmberDescription
ECONM12-05A(F)-C-180M12 5Pin (Female) A-coded 180 Degree Crimp Type Connector
ECONM12-5P(F)70CM CABLE5 pin M12 power cable 90 degree angle, 70cm
ECONM12-5P(M)-W-180M12 5P(Male) 180 Degree Wire Type Connector (DI/DO)
ECAB124030MJS4 Pin M12 RJ45 Male 3 Meters; STP Cable
CON09000030Fiber optical connector ASSY type

Downloads

Manual

Datasheet